PU-Hole Flat Weft Built for Bead Install
Polyurethane panel runs the full 83cm width with pre-formed holes for bead threading. The weft locks on by feeding bio hair through the holes and beading it down. No sewing, no tape, no glue.
Thin Flat Panel That Stays Hidden
The PU strip sits flat against the scalp instead of bulking up the way a sewn machine track does. It tucks under the client's own hair and stays out of sight, so it blends on fine or thinning hair where a thick weft would show through.
Hand-Tied Comfort Without the Trade-Off
A hand-tied weft is thin and comfortable, but it ties loose hair between three threads, so it cannot be cut and frays if you try. The butterfly gives the same low-bulk, lies-flat feel from a sealed PU strip you bead straight through, with no track to sew first.
Built to Re-Use
The panel holds up across bead-off and re-bead-on cycles, so one weft carries through multiple installs, commonly four to six cycles or more with proper care. The client lives with it, then it comes out for a cleanse and service and goes back in. Pay once per panel, install across several appointments, which is economics that strand-by-strand bond methods cannot match.
100% Virgin Human Hair, 100g Per Piece
Unprocessed cuticle stays intact and aligned across the panel. Strands sit root-to-tip the way they grew, sliding past each other instead of locking together across the wear cycle.
Color and Heat-Style Like Natural Hair
Virgin human hair with the cuticle intact takes color and tolerates heat styling the same way the client's own hair does. Tone it at the bead line and style to match, using heat protection and professional care.
83cm Wide Single Panel
Covers a wide track in one piece instead of stitching shorter sections end to end. Standard machine wefts run 2 to 4 inches. At roughly 32 inches the butterfly drops across a full install row in one drape.
Off-Scalp Install Cuts Tension
Bio hair feeds up through the PU holes and away from the scalp, following its own growth direction. Tension spreads across the bead points instead of one attachment line, which cuts daily drag on the follicles.
Bead Removal, No Cutting
Unfold the weft section, slide the bead off, lift the panel away. No solvent, no thread cutting, no shaving a bond off the strand. Bio hair walks away the way it came in.
24-Shade Color Stock
Stock runs from #1 jet black through #613 platinum, with dimensional tones (#TMS, #THG) and rooted blends (#PMB, #PGB) covering most match scenarios. Match the closest before install. See the weft application and styling guide for color blending at the bead line.
20" or 22" Stock Lengths
Ships in two pre-cut lengths that cover the typical install range without trimming the panel before bead placement.
| Hair Fiber |
100% Virgin Human Hair |
| Weight |
100g |
| Width |
83cm/pc |
| Hair Length |
20" / 22" |
| Processing Time |
10-12 business days (currently out of stock) |
Delux Butterfly Weft
PU-hole flat weft, 100g per piece, 83cm wide. Machine-made wefts use 2 to 4 inch widths sewn onto braided tracks. Hand-tied wefts knot strands between three threads for an IBE-style install, thin and comfortable but not cuttable. The butterfly pre-builds the install holes into a polyurethane top strip, so bio hair feeds up through and locks under a bead. The strip stays thin and flat to the scalp, tucks under the client's own hair, and holds up across bead-off and re-bead-on cycles for re-use over multiple installs. Same off-scalp mechanical philosophy as the bead-in topper line, scaled to a wide weft format. Pro install, pro removal, no shears or solvent at takedown.
Supplementary: Delux Butterfly Weft
Color Range
Solid shades: #1 Jet Black, #2 Dark Brown, #4 Medium Brown, #6 Chestnut Brown, #8 Light Brown, #18 Dark Ash Blonde, #24A Light Golden Blonde, #613 Bleach Blonde, #1001A Platinum Blonde
Rooted and dimensional blends: #170, #MDM, #PMB, #PGB, #TMS, #THG, #TAL, #TCS, #TFA, #TPD, #TSS, #TGI, #TAD, #TTB, #PFR
Match the closest shade to the client's base before install.
Best For
Clients adding volume or length who need the join to stay out of sight and the hold to stay easy on the hair. It works from fine or thinning hair, where a bulky weft would show through, up through medium and thick hair. Because the bead install carries the weight across many points instead of one line, it suits clients who want movement and length without the pull of heavier methods.
FAQ
What is a butterfly weft? A slim human-hair weft built on a thin PU strip. It wears light, tucks flat at the part, and holds its cut edge without shedding, and it beads straight on with no glue or tape.
Are butterfly wefts reusable? Yes. Because they install with beads and lift out cleanly, a virgin human-hair weft can be moved up and reinstalled, commonly four to six cycles or more with proper care. An extension service is built for the hair to be worn, then taken down, cleansed, serviced, and re-attached, so the same panel keeps working across appointments.
Can they be colored or heat-styled? Yes. They are 100% virgin human hair with the cuticle intact, so they take color and tolerate heat styling the same way natural hair does. Use heat protection and professional care.
How are they installed? With a beaded row or a hybrid sew-in. Bio hair threads up through the PU holes and locks under a bead, with no glue, tape, or heat. Removal unfolds the section and slides the bead off.
Can the weft be cut? The sealed PU weft can be trimmed without shedding or unraveling, unlike a hand-tied weft, which frays when cut. It ships pre-cut at 20" and 22", so most installs need no trimming.
Why is it gentler on the scalp than other methods? There is no adhesive and no tight braided track. The weight sits across many bead points rather than one line, which lowers the daily drag on the follicles and makes it more comfortable to wear.
Who is it best suited for? Hair of almost any density, from fine through thick, where the goal is added hair that moves like the client's own, sits light at the roots, and keeps the join hidden.
